Question 1

Unable to connect the CuroAI program with the Cubroid Block.

Accepted Answer

Can't you connect the CuroAI program with the Cubroid Block? Check out five things as follows.  Check 1. Turn off the scratch link and try running it again? You may reboot your laptop.  Check 2. Is the Internet connected to your laptop? If you don't have an internet connection, please connect it to your laptop.  Check 3. Is Bluetooth® on your laptop? Turn on the laptop Bluetooth®. ※ In some cases, only 1 to 6 Bluetooth® connections are connected, depending on the laptop policy (performance).  Check 4. Is the scratch link version 1.3.66? If it's wrong, please delete the existing scratch link and download and install the 1.3.66 version. Reboot your laptop.  Check 5. If the scratch link version is correct, did you set the group number? If the number is specified in the Cubroid block, you must set the group number in the CuroAI program according to the number. The group number setting is located in the upper right corner of the CuroAI program.  More than 90% of the above 5 methods are solved.  If you look at the video below, it's easy to understand.        If the above method does not work, there are two additional methods available:  1. There is a way to remove Bluetooth® from Device Manager and then re-enable Bluetooth® through Find New Hardware. Notebooks may sometimes reboot.  2. Finally, there is a way to use the Bluetooth® dongle.  If you look at the video below, it's easy to understand.

Question 2

How to set CuroAI program (Scratch 3.0 + AI)

Accepted Answer

Please download the CuroAI file from the link below.   https://drive.google.com/drive/folders/1Wt_oGpLH9gbXzkH6tsV84At9QH_JzgTx?usp=sharing    1. Video Guide I      2. Video Guide II

Question 3

Coding Cubroid 2 & 3 App |  What's the difference?

Accepted Answer

This guide teaches you :   How to link your coding blocks to the phone apps and how to code themThe difference between Coding Cubroid 2 and 3 Apps

Question 4

How to Set the Group Number.  Why do I need to do Group Numbering?

Accepted Answer

This guide teaches you how to set and use group numbering when you have more than 1 set of Cubroid Coding Blocks in the same space like classrooms, exhibitions, etc.

Question 5

Advanced Coding | App Introduction

Accepted Answer

This guide teaches you how to use your coding blocks with 'Advanced Cubroid' app.   This is only available for iPad or tablet.

Question 6

Advanced Coding Features & Examples | App Features

Accepted Answer

Question 7

How to Update the Firmware

Accepted Answer

This guide teaches you how to update the firmware using Cubroid Manager App and Coding Apps

Question 8

How to Recover the Coding Block Firmware

Accepted Answer

Are your coding blocks identified as other blocks in the apps? Was there an error during the firmware update? Are your coding blocks malfunctioning? If your answers to the following questions are YES, a firmware recovery is highly recommended.   *Check out this video to learn how to recover your firmware*

Question 9

How to set the Scratch 2.0 program

Accepted Answer

Cubroid Coding Block Scratch Guide, Setup files and Installation video* This guide assists users with the installation of all the required software for scratch coding    Cubroid Scratch File

Company

FAQ

>

About

Company

Press

Support

Support

Contact Us

Privacy Policy